Regviz

Freescale Semiconductor /MKL82Z7 /USB0 /MISCCTRL

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as MISCCTRL

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Freescale Semiconductor/MKL82Z7/USB0/MISCCTRL#0x0

7 43 0 0 00 0 0 0 0 0 0 0 0 (0)SOFDYNTHLD 0 (0)SOFBUSSET 0 (0)OWNERRISODIS 0 (0)VREDG_EN 0 (0)VFEDG_EN 0 (0)STL_ADJ_EN

STL_ADJ_EN=0, VREDG_EN=0, SOFBUSSET=0, VFEDG_EN=0, OWNERRISODIS=0, SOFDYNTHLD=0

Description

Miscellaneous Control register

Fields

SOFDYNTHLD

Dynamic SOF Threshold Compare mode

0 (0): SOF_TOK interrupt is set when byte times SOF threshold is reached.

1 (1): SOF_TOK interrupt is set when 8 byte times SOF threshold is reached or overstepped.
SOFBUSSET

SOF_TOK Interrupt Generation Mode Select

0 (0): SOF_TOK interrupt is set according to SOF threshold value.

1 (1): SOF_TOK interrupt is set when SOF counter reaches 0.
OWNERRISODIS

OWN Error Detect for ISO IN / ISO OUT Disable

0 (0): OWN error detect for ISO IN / ISO OUT is not disabled.

1 (1): OWN error detect for ISO IN / ISO OUT is disabled.
VREDG_EN

VREGIN Rising Edge Interrupt Enable

0 (0): VREGIN rising edge interrupt disabled.

1 (1): VREGIN rising edge interrupt enabled.
VFEDG_EN

VREGIN Falling Edge Interrupt Enable

0 (0): VREGIN falling edge interrupt disabled.

1 (1): VREGIN falling edge interrupt enabled.
STL_ADJ_EN

USB Peripheral mode Stall Adjust Enable

0 (0): If USB_ENDPTn[END_STALL] = 1, both IN and OUT directions for the associated endpoint will be stalled

1 (1): If USB_ENDPTn[END_STALL] = 1, the USB_STALL_xx_DIS registers control which directions for the associated endpoint will be stalled.

Links

()

Register License

Redistribution and use in source and binary forms, with or without modification,\nare permitted provided that the following conditions are met:\n o Redistributions of source code must retain the above copyright notice, this list\n of conditions and the following disclaimer.\n o Redistributions in binary form must reproduce the above copyright notice, this\n list of conditions and the following disclaimer in the documentation and/or\n other materials provided with the distribution.\n o Neither the name of Freescale Semiconductor, Inc. nor the names of its\n contributors may be used to endorse or promote products derived from this\n software without specific prior written permission.\n THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND\n ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED\n WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE\n DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR\n ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\n (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;\n LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON\n ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT\n (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS\n SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data